Product Description
Easily add an aftermarket amplifier or subwoofer to your vehicle's factory audio system with this 2-Channel Active Line Output Converter with AccuBASS by AudioControl. The LC2i converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier or subwoofer without replacing your factory radio. This two-channel line output converter also features AccuBASS technology so you can turn up the volume without losing bass.
Dimension
Product Height : 1.5 inches
Product Width :5.4 inches
Product Depth :3.25 inches
Product Weight :1 pounds
Features
Compatible with most vehicles’ OEM audio systems For use when adding aftermarket amplifiers to car audio systems without RCA preamp outputs.
2-channel interface with dual amplifier preamp outputs Features one set of active speaker-level inputs, one set of full range main line-level outputs, and one set of low-passed (1000 Hz) bass line-level outputs for adding an aftermarket subwoofer.
400W (40V) peak power input per channel @ 20k ohms For high-quality sound.
9.5V RMS (13V peak) maximum output voltage @ 14.4V For efficient operation.
AccuBASS processing Recovers bass frequencies lost at higher volumes.
Turn-on trigger mode switch Choose between GTO Signal Sense (DC offset) to automatically power the line output converter or remote 12V input for manual control.
Dual variable stereo gain controls with clipping indicator Allows you to adjust main and bass output signals from -12dB to +12dB and indicates when levels are optimal.
Selectable ground isolation Choose from common, ISO (default), or 200 ohms.
Slim chassis with integrated mounting brackets Enables quick and easy installation.
Optional dash remote Allows you to add a subwoofer with independent level control (ACR-1 sold separately).
5-year warranty To protect against defects in materials and workmanship.
What's Included
AudioControl 2-Channel Active Line Output Converter with AccuBASS
Speaker connectors
Power connectors
User manual
Reviews
-
Amazing product
Makes my factory stereo sound amazing with my subwoofers. Highly recommend this product. Best part is only having to run a few wires the length of my car. Great options and features
-
A music lover's must have
Without this device I wouldn't be able to complete this great sounding masterpiece I now have.
-
Made install easy
I needed an item that could go between my aftermarket amp/sub and my factory Bose radio/amp in a Buick. The problem I had was finding a remote wire for the aftermarket amp. This made the install easy...it has its own remote trigger and remote output. Just hook up the rear speakers into the LC2i and when you turn on your radio, the LC2i recognizes the music from the rear and turns on the aftermarket amp for the sub. Also, the factory amp starts cutting out the bass at certain levels, but the LC2i eliminates that problem. Setting the AccuBass was challenging, but not too bad. If you want full bass and easy install, this is how to do it.
-
it works
great product, but not sure if it was an unopened product i bought was assuming a never opened product but yeah not what i got definitely the box was pre-open and had Scratches on the line out put with one knob pushed in what seems like it had to be used not a malfunction error still works but yeah definitely not a brand new product
-
Quality Product
Does a great job! Installed this and had an easy time doing so.
-
Maga Bass
This is must buy item. I used this in a 2020 maxima. If have this car, you know it has an awesome system with an amp. Imagine adding another subwoofer using this input device. There is no additional items needed or tons of wires to cut. You can also adjust the gain and bass input. You won't be disappointed.
-
LC2I in 21 Bronco- works well
I used this to add an amp to my 2021 Bronco. It was easy to install, small form factor and works as advertised. Some mall turn of pops and it switches off with auto start. I have not researched a fix, it’s not a big deal most of the time.
-
Maybe mine was defective
I purchased the LC2i as many people on the forums\reddit rave about it. I could never get it to work right. the bass became inconsistent (sometimes it hits hard and other times it doesn't). My factory unit does not lower the bass as you increase the volume therefor AccuBASS was not needed and I made sure to disable it via the dials per the owner's manual instructions. I triple checked my wiring, gains on the amp, LC2i, and had the factory EQ to flat -- and still couldn't figure it out. Perhaps I got a defective unit but I ended up ordering the Wavtech linkDQ from Crutchfield instead (since Best Buy doesn't carry that brand) and resolved my issue.
-
Fingers crossed
Purchased today and haven't installed it yet. It should be a simple straight forward install but the "manual" thats included is not much of a manual and provides no information in regards to providing power/ground for the unit, connecting recommendations, adjustments, and the support area on the website has the same crumb of information as the manual. Also while trying to register the product online (I always register before install/use) i was asked for a serial number, there is not a serial number on the unit or on my Best Buy receipt and the website doesn't show where to find this serial number but says its required for the warranty.
